Epson Stylus Color 480SXU Error

Second time this has happened. “An unknown error has occurred. Unplug your printer and contact your dealer or authorized service center.” Info found here.

A Service Error where you get an “Unknown Error Message”, or a “General Error Message”, is normally a Maintenance Request Error. The maintenance request error is actually a Waste Ink Ink Pad Error and usually your remedy is to replace the Waste Ink Pad/Pads with a new one/ones and then reset the Internal Waste Ink Pad Counter. If you just reset the counter and don’t replace the pads, then your printers old pads will eventually overflow and normally start leaking ink out the bottom of your printer. You can see “Exploded Parts Diagrams” of most Epson Ink Jet Printers and can also check on possible parts ordering, by Compass Micro Inc, at http://www.compassmicro.com/parts_select.cfm . Some people actually wash the ink out of the old pads, by holding them under running cold water. Then they simply dry them out and reinstall them back into their printer. The choice on what to actually do, is yours to make. I would at least recommend getting that Waste Ink Counter reset procedure and performing it first, to make sure your printer will then work.

The Epson reset program download location is http://www.ssclg.com/download/sscserve.exe. To check printer compatibility, see http://www.ssclg.com/epsons.shtml.

The program has also features as well. The “SSC Service Utility” doesn’t work on all Epson Printers nor on all Operating Systems, and sometimes not even if the printer is a listed model, so you’ll just have to try it to see. If it doesn’t work, you might have to search for a Service Manual or the actual Reset Procedure to buy and download for reference while disassembling, troubleshooting, and servicing. You can normally find the Reset Procedures for most Epson Printers from 2manuals.com. The reset procedure is usually available for about $10. There’s a free download of an Epson Stylus Color 480 Service Manual from fixyourownprinter.com. This manual may be of some help in actual disassembly and servicing of the waste ink pads. However, you’ll still need the actual reset procedure in order to remove the waste ink counter error condition.
Here’s info about how to clean or replace the waste ink pad. I still need to do it sometime. I just had the program reset the counter, even though I didn’t replace the pad. That could be bad later on, but hopefully it won’t have much effect on the little bit of printing that I do between now and when I wash it.

Update: I actually came home after being out for the weekend, the printer suddenly started working again. I think it was the waste ink pad counter, but it needed some time to reset.

Another interesting thing to note is that the print queue was saved. On Friday I had tried printing something from Firefox, and it failed due to the abvoe problem. I shut down my computer for the weekend (power off). When I returned and powered on my computer, I opened a Word document and started printing it. The printer then started printing the page I had tried to print on Friday.

8 Responses to “Epson Stylus Color 480SXU Error”

  1. Ashton says:

    Hello, I am a website Dev. And I have a google fansite that is in the progress of completion I would like you too talk to me regaurding affiliating your googlecommunity with the site, email me at [email protected] or AIM me at ashtonhy. Thank you,

  2. Tiger-Heli says:

    Did you ever get around to cleaning/replacing these. I have the same error and would like to find more detailed replacement procedures.

  3. Phil Jones says:

    After downloading and installing the Epson reset program sscserve.exe, the steps to reset the Internal Waste Ink Pad Counter are:

    1) Double-click the Desktop icon “SSC Service Utility”.
    2) Close the “SSC Service Utility” window.
    3) Right-click the new icon in the System Tray.
    3) Point to “Protection Counter”.
    4) Click “Reset Protection Counter”.

    The green and red lights on the printer will stop flashing alternately, and the printer will be ready to use.

  4. marvin says:

    If you are planning to install a printer at your office then first read what is written below: Laser printers are potentially hazardous to health if operated in a manner that ignores their location, maintenance and usage. Risk increases more when the room wherein printer is installed is too small, ventilation is poor and usage is high. Excessive dust in electrical equipment will cause sparking. Try to have your printer installed in a well ventilated room. Also make sure that a carbon dioxide fire extinguisher is available near the machine. If these things are kept in mind then the hazards to health caused by a laser printer can be avoided!

  5. vijay says:

    my printer says theres a connection error even though all the cables are pluged in correctly. it does not want to print any documents at all…
    what should be done?
    thankz

  6. Convergence Problems…

    If you have or have ever had an 18 month old child (and older) one thing you find is that they like buttons. Mine do anyway. They like to push them. Remote control buttons, computer CD- ROM eject buttons, elevator buttons, alarm clock buttons.. you get…

  7. cesar says:

    thankz for help me.

  8. Frica says:

    Just Perfect…

Leave a Reply